|
|
Questions? Call Us!
877-530-9084
877-530-9084
If you do not have a grass catcher assembly, our Deck Adapter Kit
provides all the necessary components to attach The Lawn Tractor
Leaf Bag to your lawn tractor.
The Deck Adapter Kit is fairly easy to attach and remove. It takes some hand tools to install and fits about 95% of the lawn tractors without any modification.
The Deck Adapter Kit is fairly easy to attach and remove. It takes some hand tools to install and fits about 95% of the lawn tractors without any modification.
Priced lower than OEM
Grass Catchers at $239.95
"Bagging With Your Tractor, Not Your Back"
The Deck Adapter Kit includes:
• Universal Deck Adapter - This attaches to your mower deck to
collect and direct the leaves into the Discharge Tube.
• Discharge Tube - A wire reinforced flexible tube used to carry the leaves from the Universal Deck Adapter to the Leaf Bag.
• Chute Vent Disk - the Leaf Bag attaches here and the holes help maintain airflow.
• Lawn Tractor Leaf Bag - The time saving bag for collecting leaves while riding around on your lawn tractor.
• Miscellaneous hardware to attach above components to your lawn tractor.
• Discharge Tube - A wire reinforced flexible tube used to carry the leaves from the Universal Deck Adapter to the Leaf Bag.
• Chute Vent Disk - the Leaf Bag attaches here and the holes help maintain airflow.
• Lawn Tractor Leaf Bag - The time saving bag for collecting leaves while riding around on your lawn tractor.
• Miscellaneous hardware to attach above components to your lawn tractor.
How to check if the Deck Adapter will fit your
lawn tractor mower deck without additional work
• You will need to check the height of your mower
deck opening. This is the distance from the bottom of
the mower deck, (not the ground) to the top of the
opening that debris comes out of. This measurement
should not exceed 7”. If you have a larger deck height
please call as you will need to cut the Deck Adapter to
make modifications on your own.
• Check the fender clearence over your right rear tire.
The Discharge Tube normally sits against this fender but
may rub against the tire depending on your fenders position.
If there are controls to your lawn tractor located in the fender
you will need to attach a clamp.
•he simplist clamp we came recommend is the Irwin Quick Grip clamp with a 6 inch opening. It clamps easily to the fender without drilling, comes with non-maring rubber heads, is easily installed and removed, the tube sits on the clamp bar, and it can be purchased at any hardware store (see below)
•he simplist clamp we came recommend is the Irwin Quick Grip clamp with a 6 inch opening. It clamps easily to the fender without drilling, comes with non-maring rubber heads, is easily installed and removed, the tube sits on the clamp bar, and it can be purchased at any hardware store (see below)
Still not sure if you can install the Deck Adapter Kit? You can download and print the kit instructions below and view them
using Adobe Acrobat. Get a full understanding of what you will need to do before purchasing the kit. If you still have any questions
please contact us.
Deck Measurement
This deck measures 5 1/2". Measure
from bottom of the deck, not the ground.
If fender does not cover
tire tube will rub against it
Mount Clamp on fender
Rest tube on clamp & tie in place if needed
This product is warranted against defects in workmanship and materials for one year from date of purchase.
If you have a problem please send your bag with a written explanation and contact information to LIG, LLC,
13507 Riverton Drive, Midlothian, VA 23113.
Step 1
Step 2
Fender Clearance